HughesNet Router Admin Password and Username List 2021

Are you looking for the default admin password and username for your HughesNet satellite internet router/modem? If yes, then you have come to the right place. HughesNet is the largest satellite Internet Services Provider (ISP) in the United States. If you are one of the company’s over 1.3 million customers, you may be looking for the HughesNet router default admin login details. That’s the information that we are going to provide in this article;

HughesNet Router Default Login Details

HughesNet routers do not come with a default username. Users are taken straight to the password section. The default HughesNet admin password is admin. The information provided here is for the HughesNet HT2000W Satellite Modem. That’s the router that’s provided for all HughesNet customers. Some people prefer to use their own routers and modems. If you are one of those people, feel free to get in touch with us and we will look up the correct login credentials for your HughesNet modem. The table below provides a full HughesNet default password list;

Router ModelDefault UsernameDefault Password
HT2000Wno usernameadmin

What if the information provided here does not work?

Hopefully, the information provided above will work in your case. As noted, HughesNet provides it’s customers with the HT2000W router/modem. That’s the main device in use on the network, making life easy as far as finding the correct login credentials is concerned.

Some other companies that are out there use a wide range of routers from different manufacturers. Check out our Huawei router default username and password article to see what we are talking about here.

Anyway, it may happen that someone has already changed the HughesNet administrative password for your router. In that case, what do you do if you wish to log in?

Reset your HughesNet Router or Modem

Well, in that case, you may have to reset your router if you wish to log into the device’s admin section. If you check on the back of every HughesNet modem, you will notice that there is a reset button on there.

Press on this button with something sharp for at least 15 seconds. Once you have done that, your router will cycle off and on. You should now be able to log in using the default HughesNet router password and username given above.

However, be careful here. You should only reset your HughesNet router when asked to do so by service personnel. Otherwise you will lose your internet settings. It’s easy enough to re-input the settings, but it may take some time.

Default login details can be found on the router label

Almost all routers and modems that are out there come with a sticker on which is printed the default admin login details. That also applies for HughesNet gateways.

If you check underneath the device, you will see a label on which is printed the information that you are looking for here. For most routers, that usually includes the default IP address and the default username and password for logging into the backend of your device.

Why look for the HughesNet admin password

It’s all very well to know the HughesNet default admin password and username. But why would you look for this information? Well, most people look for this information because they wish to carry out some admin task in their router’s back-end.

Perhaps you wish to change the name of your WiFi name. Or maybe you wish to change your WiFi password. There are dozens of other tasks that can only be carried out from the backend of your modem. To get there, you need to log into the admin section. So, you need the HughesNet router admin password and username.

How to log into your HughesNet Router

To log into your HughesNet router, you need to take the following steps;

  1. Connect your phone or computer to your HughesNet WiFi network.
  2. Open a browser on your device.
  3. In the address bar of the browser, type in 192.168.0.1 and press enter.
  4. Enter the default HughesNet router admin password given in the table above.
  5. You will now be logged into your modem.

Summary

All HughesNet customers are provided with the HT2000W Satellite Modem. In this article, we showed you the hughesnet admin password for this router.

However, there are some people who use their own routers on the network. If you are one of these people, leave a message and we will get back to you with the correct details.

Meanwhile, check out our article on the CenturyLink router default admin username and password.

HughesNet Router Admin Password and Username List 2021

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top