How to Change WiFi Password Rogers all Modems

Are you looking to change the WiFi password on your Rogers modem? If yes, then you have come to the right place. Rogers uses quite a number of WiFi modems and routers on its network. That’s not really surprising, considering that it is one of the biggest media and communications companies in Canada. So, instructions on how to change WiFi passwords are going to be different from one router to the other. However, not to worry! We have you covered. In this article, we look at all the Rogers routers that are out there and we will show you how to change the WiFi passwords on each. Click on the appropriate link below to jump to instructions about your modem.

How to change the Rogers WiFi password on an Ignite WiFi Hub

If you use the Ignite WiFi hub, the following is how to change your Rogers password;

1. Make sure that you computer is connected to your Rogers WiFi network.
2. Open a browser on your PC. Any browser will do for this purpose.
3. Into the address bar, type in 10.0.0.1. That is the default I.P. address for the Ignite WiFi Hub.
4. You will now be taken to the sign in page for your modem. Sign in using the default username and password.
5. The default username for the Ignite WiFi Hub is Admin.
6. The default password for the Ignite WiFi Hub that is used on the Rogers network is password.
7. In your Hub’s settings page, click on Gateway.
8. From there, click on Connections.
9. Then you need to click on WiFi or Status.
10. Next, click on Edit on the box for the 2.4 GHz network. Type in your new password in the Password section.
11. Now you need to click on the 5 GHz section and go through the same process.
12. When done, click on Save Settings.

Rogers Change WiFi Password on an SMC D3GN Modem

The SMC D3GN is another type of WiFi router that’s commonly used by Rogers customers in Canada. If you have one in use in your home, the following is how to change the WiFi password;

1. Connect your computer to the router’s WiFi.
2. On your computer, open a browser and type 192.168.0.1 into the address bar. Press enter when done.
3. Next, you are taken to the login page for your router. Here you are supposed to enter the default username and password.
4. The default username for an SMC D3GN Rogers modem is cusadmin.
5. The default password for a Rogers SMC D3GN modem is password.
6. In your router’s settings page, go to Wireless.
7. Next, select Encryption.
8. From there, you need to go to Pre-share Key to set your new password.
9. When done, click on Apply.
10. Now you will need to logout of your modem’s settings page.
11. Finally, connect your devices to the network using the new WiFi password.

Rogers Change WiFi Password on an eero router

To change the WiFi password if you are using the Rogers eero router, you need to take the following steps;

1. On your phone, go to the eero App.
2. Open Menu.
3. Next, you need to go to Network Settings.
4. Now you need to go to Network Password.
5. Change your password and save your changes.

Change WiFi Password Rogers for the Hitron CODA

The Hitron CODA is another WiFi modem that you may have if you are a Rogers customer. If you have this router in your home, the following is how to change the WiFi password;

1. Turn on your computer and connect to your Hitron CODA’s WiFi network. It’s better to do this when connected to your internet using an Ethernet cable.
2. From there, you need to open a browser on your PC.
3. Into the address bar, type in the I.P. address 192.168.0.1
4. You will now be taken to a login page for your router. Sign in using the default username and password.
5. The default username for a Hitron CODA modem is cusadmin.
6. The default password for a Hitron CODA modem is password.
7. In your router’s Dashboard, go to Wireless.
8. From there, go to WPS & Security.
9. Now you need to go to Security Settings.
10. Note that there are 2 passwords for your 2 networks. These are the 2.4 GHz and the 5 GHz networks. Click on each of the networks to change the password (or on the one that you use in your home).
11. Type in your new password.
12. When done click on Save Changes.  
13. Now you need to reconnect your devices using the new WiFi password. Remove the Ethernet cable if you were using that.

How to Change WiFi Password Rogers Hitron CGN3AMR, CGNM3552, CGN3ACR

If you have the Hitron CGN3AMR modem, the following is how to change your router’s WiFi password for Rogers;

1. Connect your computer to your Hitron CGN3AMR modem’s internet. You can do so using an Ethernet cable.
2. From there, you need to open a browser on your PC.
3. Type 192.168.0.1 into the browser’s address bar and press enter.
4. You will now be taken to the login page for your router’s Settings. Log in using the default username and password.
5. The default username is cusadmin.
6. The default password is password.
7. In your router’s administration page, go to Wireless.
8. Next, to go WPS & Security.
9. This router has 2 WiFi bands, so you need to change the password on each if you use both. If you use one, then change the password on that one. The two modes are 2.4 GHz and 5 GHz. Open each of them and go to Password. This is where to change your password.
10. Save your changes.
11. Reconnect your devices using the new Rogers WiFi password.

Change Rogers WiFi password for the Hitron CGN2 Modem

To change the Rogers WiFi password if you have the Hitron CGN2 modem in your home, you need to take the following steps;

1. Connect your computer or phone to your WiFi network.
2. Open any browser on your computer and type 192.168.0.1 into the address bar.
3. Press enter and you will be taken to the router’s login page. Log in using the default username, which is cusadmin, and the default password, which is password.
4. In your Dashboard, select Wireless.
5. Next, go to Security.
6. From there, go to Pre-Shared Key.
7. Save your changes.
8. Log Out and connect to your network using the new password.

Changing the Rogers WiFi password on Cisco DPC3825, DPC2325 modems

This is another modem that’s common for Rogers customers. If you have it in your home, the following is how to change your Rogers WiFi password;

1. Connect your phone or computer to the network.
2. Open a browser and enter the 192.168.0.1 into the address bar.
3. On the next page, type in the default login details.
4. The default username is cusadmin while the default password is password.
5. Next, select Setup.
6. From there, go to the Pre-Shared Key section.  
7. Type in your new password.
8. Finally, you need to click on Save Settings.
9. Now you need to reconnect your devices to your WiFi network using the new WiFi password.

Change Rogers WiFi password on the Cisco DPC2325 modem

If you have the Cisco DPC2325 router in your home, you can change the WiFi password for your Rogers network in the following ways;

1. Connect your computer or phone to your WiFi network. You can do so via an Ethernet cable.
2. Open a browser. This can be Chrome, Edge, Mozilla or any other browser.
3. Open the router’s login page using the I.P address 192.168.0.1.
4. Now log in using the default username and password.
5. The default username is cusadmin, while the default password is password.
6. Next, go to Setup.
7. From there go to Wireless and then choose Security.
8. Next, go to Pre-Shared Key.
9. Type in your new password.
10. Next, click on Apply.
11. Close the window.
12. Reconnect your devices to your network using the new password.

Rogers change WiFi password for SMC 8014W-G router

The SMC 8014W-G is also a common modem for Rogers customers. If you have the SMC 8014W-G in your home, the following is to do a Rogers WiFi password change;

1. Connect either your computer or phone to your network.
2. Open any browser and type 192.168.0.1 into the address bar. That’s the default I.P address.
3. On the login page, log in using the default username and password.
4. The default username is cusadmin.
5. The default password is password.
6. Next, go to Wireless.
7. In the sub-menu that appears, choose Encryption.
8. From there, go to the Passphrase section. The passphrase is the WiFi password that you wish to change.
9. Type in your new password.
10. Click on Apply to save your changes.
11. Log out and connect your devices to the network using the new password.

Rogers Change WiFi Password Tips

This has been a comprehensive article for those looking to learn how to change WiFi passwords for Rogers in Canada. One of the challenges that people encounter when trying to make WiFi password changes has to do with the fact that different modem manufacturers have slightly different settings.

You will also have noticed from the above that even the same manufacturer may have slightly different steps for making WiFi password changes. The good thing is that though there are slight differences, they are only minor. If you know how to change the WiFi password on one router, you wont have problems doing it on any other. The following tips, in any case, should help you get there;

Login details will be on a sticker somewhere on the modem

If you have a Rogers router that’s different from the ones given above, what do you do? Well, the good news is that all is not lost. As already noted, it’s not very difficult to change a modem WiFi password. All that you need is to have the login details. That’s the default I.P, the default username and the default password. In most instances, you will find this information on a sticker somewhere on the modem. It’s usually on the bottom or at the back. With this information, you should be able to navigate your way into the modem’s settings page, where you can make changes to the WiFi password.

Use Command Prompt to find the default I.P

You need to have the default I.P address to get into your router’s settings page. And in most instances, you will be able to find the default I.P printed on the just-mentioned sticker. But for the sake of knowledge, and in case someone removed the sticker, you should note that you can use Command Prompt to find the default I.P for any modem. All that you need to do is the following;

• Get connected to your Rogers WiFi.
• Open Command Prompt on your PC. Do this by searching for cmd.
• In command prompt, type in ipconfig and press on the enter button.
• Your modem’s default I.P can be found in front of Default Gateway.

Replace your WiFi password with something secure

Changing your WiFi password for Rogers is something that’s recommended be done every now and then. It’s a good way of keeping yourself and your family protected. However, most people make the mistake of replacing their default passwords with ones that are not so secure. You should never do this. You don’t want to allow unauthorized people to have access to your WiFi network. Anyway, the following are a few WiFi password changing tips that you should follow;

• Use a password that has at least 10 characters.
• Make sure to have both lower and upper cases in your password.
• Use special characters such as *^&#%@ in your password.
• Throw figures in there to further put off would be hackers.
• On another note, consider hiding your WiFi network or choosing a WiFi name that does not reveal who you are.

Why go through the trouble of doing a Rogers WiFi password change?

For most people, changing the password to their WiFi networks is something that never really bothers them. After all, things appear secure as they are. Why go through all the trouble anyhow? Well, there are a couple of reasons why it’s advisable to change your WiFi password every once in a while;

It stops hackers from getting into your network

Hackers are the biggest menace when it comes to your WiFi network. Imagine some shady character in Asia sitting at their computer while remotely monitoring your family’s activities. Imagine losing your banking details to these people. These are all things that can happen. That’s why it’s so important to learn how to change WiFi password Rogers. You need to do it every 3 or so months to ensure that nobody is able to break into your network. One thing to note is that routers and modems tend to be serious points of vulnerability for most networks. If someone gains access, then they can do anything, including turning on your webcam and spying on you. All very frightening stuff.

You do it to keep the neighbors out

The neighbors are a slightly less serious problem when it comes to WiFi. However, they can be a menace all the same. One interesting thing that we have noted is that people out there are actively looking for information on how to break into their neighbors’ WiFi networks. Most of these people actually look up those specific words; “how to break into my neighbors WiFi network.”

Their aim is to join in the fun by streaming Ultra HD videos and watching Fails on YouTube. Before you know it, you will be getting a fair usage warning from Rogers. And if you have a limited data plan, your internet will now be lasting only a few days instead of the whole month. Of course, neighbors are mostly a menace that we bring on ourselves.

Perhaps you used your name or your children’s names as your password. Any neighbor who has been around for a while can easily guess these. Perhaps you gave them the password or your children did. Whatever the case, truth is, people tend to misuse freebies. So, should you think that something funny is now happening on your Rogers WiFi, you will know that it’s now time to change the password.