How to Change Singtel WiFi Password

Do you wish to change the WiFi password on your Singtel router? If yes, then you have come to the right place. In this article, we show you how to do a Singtel WiFi password change. Singtel is one of the biggest companies in Singapore’s telecommunications sector. If you are one of the company’s customers, you may be looking to change the WiFi password on your router for security reasons. So, how do you it? Please note that Singtel uses a wide range of routers on it’s network. Click on the one that you have in your home or office to see how you can change your Singtel WiFi password;

Change WiFi Password Singtel on Askey AP5100W WiFi Mesh

To change your Singtel WiFi password on an Askey AP5100W WiFi Mesh, you need to take the following steps;

1. Connect your computer to the Singtel WiFi network whose password you wish to change.
2. Your first task is to find the default I.P address for your WiFi mesh. It’s usually 192.160.1.1 . If that does not work, read these tips on how to find you router’s I.P address.
3. Once you have your router I.P, type it into the address bar of your browser and press enter.
4. Log into your router’s admin dashboard using the default username and password.
5. The default username for an Askey AP5100W WiFi mesh is admin.
6. The default password is also admin.
7. Once you have logged in, click on 2.4GHz.
8. Next, click on Security.
9. Now go to the Pre-Shared Key (Password) section. Type in your new Singtel WiFi password.
10. You will notice that your Askey AP5100W WiFi mesh operates on 2 WiFi bands. Read about dual band WiFi here. Changes that you make to the 2.4GHz section also apply to the 5GHz band.
11. Save your changes.
12. Reconnect your devices to your WiFi network using the new password.

Singtel WiFi Password Change on AirTies 4930 Router

If you have the AirTies 4930 router in your home or office, the following is how to do a Singtel WiFi password change;

1. Connect your computer to the AirTies router’s WiFi.
2. Open a browser and type your router’s default I.P into the address bar. That’s usually 192.168.1.1. If that does not work, check out our tips on how to find the I.P address for any router.
3. Once you have your router’s I.P, type it into the address bard of a browser and press enter.
4. You don’t have to log into this router.
5. Click on Quick Setup.
6. Finally, go to the Password/Pre-shared key section to change your Singtel WiFi password.
7. Save your changes and reconnect all your devices using your new WiFi password.

Change Singtel WiFi Password on AirTies 4920 Router

If you have the AirTies 4920 router in your home or office, the following is how to change your Singtel WiFi password;

1. Connect your computer to the Singtel WiFi network whose password you wish to change.
2. Open a browser and type the default I.P for your AirTies router into the address bar. That’s usually 192.168.1.1.
3. If that does not work, check out our tips on how to find the I.P address for Singtel WiFi Mesh devices and routers.
4. Once you have the correct I.P, type it into the address bar of your browser and press enter.
5. Next, click on Wireless.
6. From there, click on Network Name and Password.
7. Then you need to click on Re-configure Access Point.
8. You can now change your Singtel WiFi password.
9. Save your changes when done.
10. Reconnect your devices using your new Singtel WiFi password.

How to Change WiFi Password on Singtel Mesh Router, Singtel AC Plus and Singtel Elite

Many Singtel customers have Singtel Mesh Routers, Singtel Ac Plus routers and Singtel Elite routers in their homes and offices. To change the WiFi password on a Singtel router, you need to take the following steps;

1. Connect your computer to your Singtel WiFi network.
2. Open a browser and type in 192.168.1.254 and press enter.
3. You may be required to log in using the default username and password.
4. The default username is usually admin.
5. Find the default password on a sticker under your router.
6. Next, you need to click on the tab showing all your connected devices.
7. Click on Mesh Controller.
8. Write down the I.P address for the Mesh Controller.
9. Now, open a new tab on your browser and type in this I.P address for Mesh Controller.
10. Press enter.
11. Now click on General.
12. Next, click on Wireless.
13. Login using the password and username that’s on your device.
14. Go to 2.4GHz Network Key and change your WiFi password. These routers have dual band WiFi. The same password can be used on both bands.
15. Save your changes when done.
16. Reconnect your devices using your new Singtel WiFi password.

Singtel WiFi Password Change on a Aztech DSL7009GR(AC) Router

To change your Singtel WiFi password on an Aztech DSL7009GR(AC) router, you need to take the following steps;

1. Connect your computer to your Singtel WiFi network.
2. Open a browser and type 192.168.1.254 into the address bar.
3. Press enter when done.
4. Hover your cursor over Quick Setup and click on Wireless.
5. Your router has 2 WiFi bands. By default, settings for the 2.4GHz band appear.
6. Change your WiFi password and save your changes.
7. To change the WiFi password on the other band, click on 5GHz Wireless Settings.
8. Change your password and save your changes.
9. Reconnect all your devices to your WiFi using the new password.

Tips to Change Singtel WiFi Password

One of the challenges that people encounter when trying to change their Singtel WiFi passwords has to do with the fact that there are so many different types of routers in use on the network. Basically, the steps for changing a WiFi password are the same, whatever the router that you may be using. However, there are a few differences that can be confusing if you are a beginner. In this article, we have shown you how to change Singtel WiFi password on different router types. But what are the basic steps for doing this?

Basic steps for changing WiFi passwords

We have been writing lot’s of articles on this subject for our blog. As noted above, there are not that many differences in the ways in which WiFi passwords are changed. Check out our article on How to Change WiFi Password Tedata. Te Data is in Egypt. Also look at another of our articles on how to change WiFi password Etisalat in the UAE. You will notice, in all those articles, that changing the WiFi password on a router is composed of the following basic steps;

• First, you need to find the default I.P address. That’s the major challenge in this particular instance.
• Next, you need to have the default username.
• Finally, you need to have the default password for your router or WiFi Mesh.

Where do I get this information?

With this information, you should be able to log into your router’s admin page to do a Singtel WiFi password change. It’s not that complicated. But where do you get all this information that you need to log into your router’s admin dashboard? Many people spend minutes looking for the information on Google.

However, that is not necessary. In almost all instances, you can find the information that you need to log into your router’s admin dashboard on a sticker under the router. Sometimes the sticker can be found behind your router. For Singtel Mesh devices things are complicated by the fact that you have 2 I.P addresses. However, it’s easy enough to get the Mesh Controller I.P.

Once you have this information, log into the admin Dashboard and change your Singtel WiFi password. In most instances, you need to go to Wireless and then to Security. Find Pre-Shared Key or the Passphrase section. That’s where you change your WiFi password for Singtel.

Always choose a strong password

What’s the use of learning how to change Singtel WiFi password? That’s something that we will look at below. But basically we can say people do WiFi password changes for Security reasons. However, a lot of people out there do the opposite by choosing passwords that are too weak and too easy to break into.

Quite a lot of people change their Singtel WiFi passwords to their children’s names and birthdays. Now, you may think that that’s a sign that you love your children, but it opens you up to hacking. Thing is, all WiFi passwords should be as secure as is possible. The following tips should help you achieve this aim;

• Your Singtel WiFi password should contain at least 10 characters. That way, people will have difficult guessing what it is.
• All passwords should be composed of both upper and lower cases. Passwords are caSe sEnsiTive. By doing this, you ensure that people will not find it easy to break into your network.
• Throw in a special character or 2 as you change Singtel WiFi password. Special characters are such things as *&!@#$ and ^. They serve to further confuse things for would be hackers.

How to Find the Default IP for a Singtel Router

This is the first thing that you need as part of the process of changing your Singtel WiFi password. In most instances, the default I.P address can be found on the sticker on the back of or under a router. Sometimes it’s in the form of a web address. What’s complicated about Singtel is that you have 2 I.Ps, one for the Optical Network Router (ONR) and another for the WiFi Mesh or router.

Log into your Optical Network Router (ONR) to find your router’s default I.P

You can find the default I.P for your WiFi Mesh or router by first logging into the ONR. To do so, you need to take the following steps;

1. Connect your computer to your Singtel WiFi network.
2. Open a browser and type 192.168.1.254 into the address bar.
3. Press enter when done.
4. Login using the default username and password.
5. If you have the Huawei HG8244H Optical Network Router (ONR), the default username is root and the default password is admin.
6. If you have the Huawei HG8240T5 Optical Network Router (ONR), the username is root. The password can be found on the bottom on the device.
7. You will now need to click on the icon for LAN Devices (see above). This can be found in the Home Page tab.
8. Look for your router or WiFi mesh and find it’s I.P address.
9. Go back to the instructions at the top relating to your particular mesh or router to continue with the process of changing your Singtel WiFi password.

Use Command Prompt to Find your Mesh I.P

You can also use Command Prompt on your computer to find the default I.P for any router. You simply need to take the following steps;

• Connect your computer to your Singtel WiFi.
• Next, open Command Prompt.
• You can do this by searching for cmd in Windows search bar and then clicking on the Command Prompt icon.
• In Command Prompt, type in ipconfig and press enter.
• Now, scroll down to Default Gateway, where you will see the default I.P for your Singtel router.
• Type that into your browser’s address bar and press enter.
• Now you will need to log in using the default username and password that are printed on your router.

Reset your router if you have forgotten your admin password

In most instances, it’s recommended that you also change your Singtel router’s admin password as part of the process of securing your network. However, what then happens is that some people out there tend to forget their new router passwords.

Then the next time they want to change their WiFi passwords, they cannot do so because you need to have the router password to get into the admin page for your device. But what do you do in that case?

Well, it’s a simple matter of resetting your Singtel WiFi router or Mesh to be able to get into the admin page. You can do this by pressing on the reset button on the back of the device for up to 15 seconds. With the reset done, you should be able to log in using the default password.

Why learn how to change my WiFi password Singtel?

That’s a question that we get a lot from people. They want to know why it’s necessary to learn how to change Singtel WiFi password. We have already noted that the major reason for doing this is Security. You want to make sure that your Singtel WiFi network is as secure as possible. Below are some of the reasons for doing a Singtel WiFi password change;

Singtel Change WiFi password to protect yourself from your good neighbors

We all love our neighbors, right? Or we hate them, depending on how nosy they are. Whatever your attitude, truth of the matter is that most people in Singapore are on the hunt for ways in which they can break into their neighbor’s WiFi networks. You may have done this yourself at one point or the other. So, if you did it, what do you think your neighbors are doing?

They are busy trying to steal your WiFi. In fact, “how to hack WiFi,” is a common keyword on Google in Singapore and across the globe. In most instances, neighbors are ordinary people. They are not sophisticated enough to do hacking hacking.

But they have very good investigative skills. In fact, the FBI and the movies could learn a thing or 2 about investigating from your neighbors. First, they ask for your WiFi password directly. And when you refuse to hand it over, they send their children to play with your children.

Kids being kids, they will share their WiFi passwords with friends. From there, everybody around you will start using your WiFi because the sharing will go on. The next thing that happens is that your WiFi will no longer be going that extra mile.

Or you will discover that your internet has significantly slowed down. Some people blame Singtel for this. What they don’t know is that it’s their very good neighbors who are stealing from there. In fact, one cheeky neighbor went so far as to lock a person out of their own WiFi network. Should any of this happen to you, you will know that it’s time to learn how to change WiFi password Singtel.

You do it to protect from hackers

Hackers are another reason why people in Singapore should learn how to change Singtel WiFi password. Hackers are not worried about your data. What they want are your banking details. With these, they will be able to steal your life, including your hard earned money. So, you need to protect your network by changing your Singtel WiFi password every now and again. Otherwise, you are going to end up losing more than data.